MX Series

Micron ratings from 0.1 to 10 micron

All polypropylene construction provides broad chemical compatibility

Meets requirements of the FDA regulation 21 CFR for food and beverage applications

Larger pleated effective filter area offers high flow with low pressure drop

Membrane and the structural components are thermally bonded

Serial filter media layers provide longer filter life and high throughput

Sanitizable by most common methods, sterilizable by steam.

MX series filter cartridge is nominally rated high efficiency depth filter available in removal rating range from 0.1 to 10 micron. It is designed to meet the flow, differential pressure, and retention requirements of a wide range of micro-filtration applications.

Constructed of all polypropylene components provides board chemical compatibility and low extractable.

The 100% polypropylene graded density filter media is engineered for high particle loading application and longer filter life.

U.S. Standard lengths, end-caps and seal materials of MX series filter cartridge can fit most currently available cartridge housings and replace most currently used filter cartridges.

█ Food & Beverage

█ Electronics

█ Ultra Pure water

█ Pharmaceuticals

█ Cosmetics

█ Photographic solutions

█ Plating solutions

█ Organic solvents

█ Compressed air and gas

Materials of filter Media
Pleated non-woven polypropylene

Support Materials
Polypropylene

Gasket or O-ring Materials
Silicone or Ethylene propylene

Sealing Technology
Thermal bonding

Maximum Operating Temperature
80 ^oC (176 ^oF) at 14 psid (1 bar)
60 ^oC (140 ^oF) at 60 psid (4.1bar)

Maximum Differential pressure
60 psid (4.1 bar)

Typical Effective Filtration Area
Per 10" (25.4mm) length
0.1 and 0.2 micron : 0.40 m²
0.45 and 1micron : 0.43 m²
3, 5 and 10 micron : 0.56 m²

Seterilization/Sanitization method
Autoclave : 121 ^oC for 20 minutes

	HOME	FILTER HOUSINGS	FILTER CARTRIDGES	CONTACT US	E-MAIL


HOME E-MAIL
COPYRIGHT @2005, WELLTECH PACIFIC LIMITED, ALL RIGHTS RESERVED